Bead Locks
TM  9-2320-280-20-2 8-8. INNER RIM STUD MAINTENANCE (Cont’d) W A R N I NG Never  inflate  a  wheel  assembly  before  checking  wheel  locknut  torques  to ensure  the  wheel  locknuts  are  tightened  to  specifications.  An  assembly with  improperly  tightened  locknuts  could  separate  under  pressure, resulting in serious injury or death. Always use a tire inflation cage for inflation purposes. Stand on one side of the cage during inflation, never directly in front. Keep hands out of cage during inflation. Inflate assembly to recommended pressure, using a clip-on air chuck. Do not exceed 50 psi (345 kPa) cold inflation pressure. Failure to follow these instructions may result in serious injury or death. 10.   Place tire assembly (5) in safety cage and inflate front and rear tires to recommended tire pressure (TM   9-2320-280-10). 11.   Check for leaks around rim edges, insert, FOLLOW-ON TASK: Install wheel (para. and valve bore (8) with soapy solution. 8-3). 8-29



Please feel free to link to this site so that others can find it.  It's easy to link to this site, just copy one of the texts below onto your web page:



Zen's Bronco





Copyright © 2000-2005