Next
RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (M1123 AND
“A2” VEHICLES) (Cont’d)
10.Lay tire (1) flat.WARNING• Do not use runflat compressor if compressor strap is frayed or damaged.Inspect tool’s pivot points and bearings and ensure runflat is free ofgrease and runflat compressor strap is centered around runflat. Failureto do so could cause injury to personnel.• Any oil on runflat compressor belt or handle could result in personnelinjury or damage to equipment. Wipe any oil off from belt or handle.NOTEPerform steps 11 and 12 when using runflat compressor P/N J39250.Perform steps 13 and 14 when using runflat compressor P/N 528236.10.1.Make sure gear and pivot points on runflat compressor (6) or (3) have a light coat of oil to ensureease of operation and protect from rust.11.Position runflat compressor (3) on runflat (2) so that runflat compressor hex drive (4) is facing upand strap (5) is centered around runflat (2).NOTECompress runflat by rotating hex drive in either direction. Rotate hexdrive opposite to loosen.12.Using runflat compressor (3), compress runflat (2).13.Position runflat compressor (6) on an outer edge of runflat (2) with handle assembly (7) facing upand strap (8) centered around runflat (2).NOTECompress runflat by rotating the handle assembly in a clockwisedirection. Rotate handle assembly counterclockwise to loosen.14.Using runflat compressor (6), compress runflat (2).NOTE• It may be necessary to use a tire spoon and tire soap to removerunflat from tire.• When using runflat compressor P/N 528236, handle may need to beremoved before removing runflat.15.Remove runflat (2) from tire (1) and remove runflat compressor (3) or (6) from runflat (2).RUNFLAT COMPRESSOR (P/N J39250)RUNFLAT COMPRESSOR (P/N 528236)TM 9-2320-280-20-28-24.4Change 28-5.1. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (M1123 AND“A2” VEHICLES) (Cont’d)
Please feel free to link to this site so that others can find it. It's easy to link to this site, just copy one of the texts below onto your web page:
