Back
6-11. STEERING  KNUCKLE  AND  ARM  MAINTENANCE  (ALL  EXCEPT  M1009)
Up
Axles
Next
6-11. STEERING   KNUCKLE   AND   ARM   MAINTENANCE   (ALL   EXCEPT   M1009) (Conít)
TM   9-2320-289-34 6-11. STEERING   KNUCKLE   AND   ARM   MAINTENANCE   (ALL   EXCEPT   M1009) (Con’t). NOTE On   left   side,   steering   arm   (3)   is   installed   to   steering   knuckle   (8)   with   4 nuts   (2).   On   right   side,   upper   kingpin   bearing   cap   is   installed   to steering   knuckle   with   4   bolts   and   Iockwashers. l Left  side  disassembly  is  given. 1. Remove   4   nuts   (2)   alternately   at   steering   arm   (3).   Remove   steering   arm,   spring   (4),   and spring  retainer  (5).  Remove  gasket  and  discard.  If  present,  discard  4  Iockwashers. 2 . Remove   4   bolts   (16),   Iockwashers, and  lower  kingpin  bearing  cap  (15) from   steering   knuckle   (8).   Discard Iockwashers, TA50563 6-72

 


 

Please feel free to link to this site so that others can find it.  It's easy to link to this site, just copy one of the texts below onto your web page:

 

 

Zen's Bronco

 

 

 

 

Copyright © 2000-2005